The real gold Underground 3D AKS Gold Detectors with 6 pieces Signal booster Long Range Diamond Gold Silver Copper Detector ALISA

AKS Gold Detectors main features:

Search range:800M Detecting depth:14M Energy:12V 1600mAh Launch frequency:5.6-6KHz Signal frequency:360–440Hz weight:3.2KG Detection type: gold, silver, copper, precious stones

It will guide you to the direction of the detected object, and you can find the detected object based on the direction it guides.

The correct use of the tracker searcher:
Tilt the searcher up by 1-3 degrees; when holding the searcher, clamp your body with your hands and do not shake; when walking, pay attention to the scanning speed. If the speed is slow and the movement is not enough, the instrument will not be polarized. And if the speed is too fast, it will prevent the detection of objects;

Because the handle of the instrument rotates freely, the wind will interfere with Dexar. Therefore, the instrument will be disturbed to a certain extent when used under windy conditions. The use effect of this instrument is closely related to the operator’s scanning control skills.

Choose a comfortable position to stand on the ground, hold the instrument with your hands, and keep your elbows tightly close to your sides. Note: You must place this instrument in front of your body, allow enough space for the receiving antenna to be deployed, and tilt the antenna slightly downward from the horizontal. This angle is about 7 degrees to 10 degrees.

            
Hold the instrument as mentioned above, scan very slowly in an arc, while turning yourself. At this time, the detector’s elbows should always be close to the sides of the body, and it is enough to rotate about 40 to 60 degrees. Note: The detector must rotate slowly and keep the body steady.

Standardize your scanning actions. First, let the receiving antenna stretch out correctly. Place the receiving antenna directly in front of you and extend it at 90 degrees to your body, without deflecting it to the left and right.

When the antenna is aimed at the target, the instrument will lock, even if you cross the target and continue to detect. When you feel that this lock is effective, you remember this direction. Then, move the instrument to the left or right about 10 meters, and repeat the process of locking the target just mentioned. Observe the locking direction this time, the intersection of the two directions is the buried position of the target.

If you feel that the specific position measured just now has a certain offset, you can lock it from another angle. If the target is within 10 meters, you will slowly and steadily follow one of the prescribed routes. When you pass the target and are directly above it, the antenna of the instrument will swing on both sides. The position measured at this time is very accurate.

Operation Method: 1. Hold the instrument as above, scan very slowly in an arc while turning yourself. At this time, the prober’s elbow should always be tightly pressed against both sides of the body, and it would be possible to turn it from 40 degrees to 60 degrees. Note: The explorer must slowly rotate and keep the body steady.
2, regulate your scanning action. First, let the receiving antenna stretch properly. Position the receiving antenna directly in front of you, at 90 degrees to your body, and do not deflect to the left or right.
3. When the antenna is aimed at the target, the instrument locks in, although you continue to probe across the target. When you think this lock is valid, you remember this direction. Then, move the instrument about 10 meters to the left or right and repeat the process of locking the target. Observe the locking direction of this time. The intersection of the two directions is the buried position of the target.
4. If you feel that there is a certain offset in the specific location just measured, you can lock it from another angle. If the target is within about 10 meters, you slowly and steadily follow one of the defined routes. When you pass the target and it is directly above it, the instrument’s antenna swings on both sides. At this time, the measured position is very accurate.
    Our product advantage： 1, We updated the handle, the handle material is a high-end metal handle, which makes the device more flexible 2, We have added 6 signal boosters, which make it more accurate and the detection range is farther 3, We updated the probe chip, which effectively recognizes the magnetic fields of gold, silver, copper and diamonds. 4, We have 4 colors, gold, blue, black, champagne,You can tell me the color you like, otherwise we will send the gold by default.   Maintenance and maintenance: This kind of instrument will open the door of wealth for you, help you on the top of my career. The following advice will help you to correct use and spare the good the instrument, improve the instrument was used 1,Do not remove or modification of instrument. 2,In the process of operation to avoid mobile phone or other metal near the instrument. 3,Please at 0°c-40°c temperature and 10%-30% humidity environment use this instrument is the best. 4,Use wire, needle etc metal will short circuit batteries, also will not battery with necklace metal put together, it could lead to electricity leak, overheating, burst and fire. 5,Do not charge for more than 24 hours. Note: new battery only through two or three times complete charge and discharge cycle to achieve the best effect. 6,Away from the dust and dirt, they can lead to corrosion and wear parts. Regularly with wet cloth to wipe the probe to keep its appearance neat and clean like new. Not using harsh chemicals cleaning products.